SCAEDA
Contro unit with touch screen for configuration and monitoring through a synoptic, based on industrial communication and allowing the connection of up to 14 gas transmitters with serial communication per line, up to a maximum of 3 lines (42 transmistters).
The connection to the transmitters via RS485 is "plug-and-play", which means that these are automatically detected by the control unit and do not need to be configured.
Each connected transmitter has 2 configurable alarm levels in both value and operating mode. In addition, through the control unit, it is possible to communicate individually with each transmitter for diagnosis, configuration and calibration. Each line has 4 potential-free inputs that can be addressed to any of the line outputs and can be configured in operating mode, normally open, normally closed, latched or not latched.
TECHNICAL SPECIFICATIONS
| Ambit | Commercial and industrial | The standard configuration consists of one line. Additional lines are available up to a maximum of three. | |
| Alimentation | 110-230 Vac – 50/60 Hz | Alarm levels |
1 alarm silence (by line) 2 levels per sensor |
| Inputs | 4 LP (by line) | Indications | Touchscreen synoptic display |
| Outputs | 5 alarm/fault (by line) |
MODELS
Reference |
Name |
Screen size |
Max. Nº Sensors |
Screen Size |
Additional line |
|---|---|---|---|---|---|
| 03826 |
SCAEDA 42/10 |
42 | 10'' | 500 x 430 x 210 mm | 03828 |
| 03824 |
SCAEDA 28/7 |
28 | 7'' | 425 x 325 x 180 mm | 03827 |